Whats App : +8613992884879    WeChat : 13992884879    Email : info@ericcointernational.com
You are here: Home » Industries » Maritime » Beidou /GNSS Satellite Based Enhanced High Precision Positioning Board 

Contact Us

 :Room 20A,1st Building,Ruixin Mansion ,No.25 ,GaoXin Road ,Xi'an,China
  :+8613992884879
  :info@ericcointernational.com
:13992884879
:Ericco167
:+8613992884879
Share to:

Beidou /GNSS Satellite Based Enhanced High Precision Positioning Board 

ER-PB-04 Features
◆Support star base differential rapid recapture.
◆Adopt new Athena engine, support RTK satellite base endurance
◆ Support single Beidou, single GPS and multi-star combined RTK
Quantity:
  • ER-PB-04
  • ERICCO

Introduction

ER-PB-04 Beidou /GNSS Satellite Based Enhanced High Precision Positioning Board 

 It is a high performance positioning receiver that supports China precision satellite-based enhancement and can achieve centimeter-level positioning accuracy on its own.The board

Supports multi-system mufti-frequency points,BDS B1/B2/B3,GPSL1CA/L1P/L1C/L2P/L2C/

L5;GLONASS G1 / G2, P1 / P2.Galileo E1BC/E5a/E5b;QZSS L1CA/L2C/L5 / L1C;L - Band.Support single system working mode and multi - system joint solution mode.The board is equipped with carrier phase RTK function, providing high positioning accuracy and variable data update rate, supporting ultra-long baseline RTK and fast initialization.Set L-Band star based enhancement, RTK, SBAS and other positioning functions in one, reserved Ethernet port and external clock input interface, can be widely used in unmanned driving, surveying and mapping, mechanical control, Marine engineering and other fields.

Features

Support L-band, can receive Chinese precision star based enhancement service, single machine can achieve centimeter level positioning accuracy

Adopt new Athena engine, support RTK satellite base endurance;

Support star base differential rapid recapture.

Support single Beidou, single GPS and multi-star combined RTK

Support for GPS, GLONASS, BeiDou, Galileo and QZSS

Support ultra-long distance RTK and fast initialization

Compatible with ROX, RTCM2, RTCM3.0,RTCM3.2, CMR, CMR+ and other differential data formats

With serial port, USB, CAN port and network port, more control options

Support 10MHz external clock input


Specifications

GNSS  Performance Index

Receiving satellite signals

GPS L1CA/L1P/L1C/L2P/L2C/L5

GLONASS G1/G2
BeiDou,B1/B2/B3
GALILEO E1BC/E5a/E5b
QZSS L1CA/L2C/L5/L1C

Pass number

600

SBAS Tracking

Three-channel parallel tracing

Data updating rate

1Hz standard,50Hz authorizable

Horizontal positioning accuracy

Stand-alone

1.2Meter(RMS)

DGPS

0.3Meter(RMS)

SBAS

0.3Meter(RMS)

RTK

8mm+1ppm
China precision

4cm(RMS)

use H10 service

15cm(RMS)

useH30 service

25cm(RMS)

use Atlas Basic service

Timing accuracy(1PPS)

20ns

Cold start

60s

Warm  start

20s

Recapture time

<1s

L-band performance


Pass Number

unipath

Frequency range

1525 to 1560MHz

Communication indicators

Data interface

serial port:3pcs Full duplex serial port(3.3V CMOS),

1PC external DGPS differential dedicated port,

USB:1pc USB device
CAN:2pc (reserved)

Baud rate

4800~460800bps

Difference scheme

RTCM-SC-104(SBAS/Beacon),

Self-difference scheme ROX, RTCM2.x, RTCM3.0, 

RTCM3.2, CMR, CMR+

Data format

NMEA 0183、self  binary

Timing output

1PPS(CMOS,Active-high,Rising-edge  synchronization ,

10kΩ,10pF load)

Event ID input

CMOS,Active-low,Falling-edge synchronization,

10kΩ,10pF load

Electrical Specifications

Working voltage

3.3VDC ± 5%

Power consumption

1.8 W (GPS L1/L2 GLONASS G1/G2)

2.9 W(The full frequency point contains L-BAND)

Working current

550mA (GPS L1/L2 GLONASS G1/G2)

880mA (ful-lfrequency-pointGPS+GLONASS+BeiDou+LBAND)

Antenna power supply

5V

Environmental index

Working Temperature

-40°C~+85°C

Storage Temperature

-40°C~+85°C

Mechanical indicators

Size

100L x 60 W x 10 H mm

Weight

44g

Power/data connector

24+16pin Male head, 2mm spacing

Antenna connector

MMCX Female head straight

External clock connector

MMCX Female head straight


FAQ

1. What is your quotation condition?

If you have DHL or Fedex account ,we can quote EXW price ,otherwise CIF or FOB price.


2.Do you have any discount when procurement? 

We will quote sample price at first and we will quote volume price if you need more quantity.


3.How long is the delivery time?

For sensors,parts,modules : in stock-one week;no stock-2-4weeks; For systems,generally ,8-12 weeks.


4.How to deal with the quality problems?

If confirmation of product quality problem we can replace it freely for customer in the shortest period.


If interested in Beidou /GNSS Satellite Based Enhanced High Precision Positioning Board , pls contact us :ericco189@ericcointernational.com

CONTACT US

Whats App:+86-13992884879
 WeChat:13992884879
  Ericco167

SEND MESSAGE

Copyright © Ericco International Limited All rights reserved.  |  Support By Goodwaimao |  Sitemap